OIL PAN, SBC PRE-85, CIRCLE TRACK, SPRINT CAR, 7.25 IN. DEEP
$910.99
Fits: Sprint Car and any chassis with no cross-member under the engine
Aluminum, Wet Sump, 9.5 Quart Capacity, 7-1/4" deep
Fits: Sprint Car and any chassis with no cross-member under the engine
- Clears 4.25" stroke with most steel or aluminum rods
- Fabricated aluminum with billet end seals to ensure a consistent sealing surface
- Fits 4 bolt main cap blocks
- Large kick-out design for maximum horsepower and oil temperature reduction
- 5 trap doors, diagonal runner, crank scraper & windage tray for superior oil control
- Inspection bung with plug, oil level check and a magnetic drain plug
To Purchase any of these products please go to Related Products below.
| PART NO. |
RECOMMENDED PICKUPS |
| 24101 |
Fits: Flange Type Melling SBC Oil Pump M10555 |
| 24103 |
Fits: Moroso SBC Race Pump Nos. 22099, 22101 or M55 style pump |
| 24104 |
Fits: Moroso SBC HV Race Pump Nos. 22109, 22111 or M55HV style pump |
| 24313 |
Fits: Melling M155, 10554 and 10554ST pumps, 3/4" press-in flange |
| 24325 |
Fits: Moroso Part Nos. 22149, 22159, 22150, 22160 and 22162 and Melllng 77/77HV style oil pumps |
| PART NO. |
AVAILABLE OPTIONS |
| 62256 |
Wrench, Oil Pan T-Handle, 7/16 inch, 6PT |
| 38385 |
Billet Nose Oil Pan Stud Kit |
| 93150 |
Oil Pan Gasket, Pre-'85 block with a 2 piece rear main seal |
| 97007 |
Drain Plug, 3/4" -16 Deep Thread with O-ring |
To Purchase any of these products please go to Related Products below.
| PART NO. |
RECOMMENDED PICKUPS |
| 24101 |
Fits: Flange Type Melling SBC Oil Pump M10555 |
| 24103 |
Fits: Moroso SBC Race Pump Nos. 22099, 22101 or M55 style pump |
| 24104 |
Fits: Moroso SBC HV Race Pump Nos. 22109, 22111 or M55HV style pump |
| 24313 |
Fits: Melling M155, 10554 and 10554ST pumps, 3/4" press-in flange |
| 24325 |
Fits: Moroso Part Nos. 22149, 22159, 22150, 22160 and 22162 and Melllng 77/77HV style oil pumps |
| PART NO. |
AVAILABLE OPTIONS |
| 62256 |
Wrench, Oil Pan T-Handle, 7/16 inch, 6PT |
| 38385 |
Billet Nose Oil Pan Stud Kit |
| 93150 |
Oil Pan Gasket, Pre-'85 block with a 2 piece rear main seal |
| 97007 |
Drain Plug, 3/4" -16 Deep Thread with O-ring |
Prop 65 Warning
