80 Carter Drive
Guilford, CT 06437-2116
Phone: (203) 453-6571
Tech Line: (203) 458-0542
Fax: (203) 453-6906
Copyright © 2002 Moroso Performance Products, Inc.
All Rights Reserved.
|
|
|
OIL PANS
| |
Whether you drag, oval or road race, Moroso has the pan your engine needs
specially designed for front or rear wheel drive sport compacts.
Each pan is fully fabricated from aluminum or steel, with race proven
features that control oil for maximum power. The key is to keep the
crankshaft free of excess oil which allows the engine to spin freely and
achieve its full power potential. Check out all the special features listed with our pans.
Need a special pan design? No problem! Our custom department will fabricate
an oil pan in steel or aluminum to meet your exact specifications.
|
|
|
|
Wet Sump, 6-1/4 Quart Capacity (with stock oil cooler installed), 4" Deep
|
|
Engine Application: 13B Rotary
Fits: Tube chassis cars and other cars without a cross-member located under engine (check dimensions for clearance)
- Fully fabricated
- 3/8"-thick billet rail with integral X-brace greatly strengthens
engine assembly to reduce twisting and axial deflection
- Includes .080"-thick aluminum Baffle Plate to de-aerate and
cool return oil (other baffles are only .060" thick)
- Includes an oil pump pickup specially designed for this pan;
access holes in pan facilitate mounting pickup to the front cover
- Includes magnetic drain plug with extra copper washer and pan
mounting kit with hex-drive steel studs to eliminate stripping the
engine block and serrated-face flare nuts to withstand vibration
- Accommodates stock pan gasket and dipstick with existing oil level marks
|
NOTE: OIL PAN CAPACITIES DO NOT INCLUDE OIL FILTER CAPACITY.
|
| No. | Description/Application |
| 20940 | Oil Pan, Aluminum, Rear Sump |
|
PART # REPLACEMENT PART
38366 Oil Pan Stud Kit
|
Wet Sump, 6-1/4 Quart Capacity, 4" Deep
|
|
Engine Application: 13B Rotary
Fits: RX-3 & RX-4 models; several rotary engine conversions including 1981-84 Toyota Starlet, 1964-83 Toyota Corolla, 1971-73 Datsun 1200 & others with little or no cross-member modifications; also tube chassis cars
- Rugged 3/8" thick billet aluminum gasket rail with integral
cross-brace serves as a girdle to greatly strengthen the entire engine
assembly and reduce flexing under hard driving
- Fully fabricated
- Dual trap door baffles
- Enlarged sump increases capacity to 6-1/4 quarts (with stock oil cooler installed)
while adding only a quarter-inch in depth to provide ample ground clearance
- Includes oil temperature sender provisions
- Includes magnetic drain plug with extra copper washer, pan mounting kit with
hex-drive steel studs to eliminate stripping the engine block and serrated-face flare nuts
to withstand vibration
- Accommodates stock pan gasket and dipstick
(with modification)
|
NOTE: OIL PAN CAPACITIES DO NOT INCLUDE OIL FILTER CAPACITY.
|
| No. | Description/Application |
| 20942 | Oil Pan, Aluminum, Front Sump |
|
RECOMMENDED OIL PUMP & PICKUP
Use Stock Oil Pump & Pickup
PART # REPLACEMENT PART
38366 Oil Pan Stud Kit
|
Return To Menu
|
