| Import-Sport Compact Dry Sump Oil Pump ![]() src="./hondaoilsystem_files/image002.jpg" v:shapes="_x0000_i1034">
- One pressure section and two scavenge sections
- Increases crankshaft horsepower by decreasing windage
- Creates crankcase vacuum which decreases blowby and intake charge contamination and also decreases detonation in NO(2) applications
- Eliminates failure common to stock oil pumps
- Externally adjustable oil pressure
|
| | No. | Description/Application | | 25630* (NEW) | Three Stage Dry Sump, Reverse Rotation. Inlet and outlet holes are -10AN thread. |
| *Note: All inlets must be plumbed to oil pan Accessories:
No 25710 - Drive Kit
No 23497 - Pump Mount Bracket
No 22667 - Dry Sump Tank
No 23815 - Oil Filter Block-Off
No 23750 - Remote Filter Mount
No 23766 - Remote Filter Mount
No 22459 or 22465 - Oil Filter
External Oil Pump, Honda
Single Stage
Reverse Rotation 
| Fits: Honda 1.6L, 1.8L & 2.0L engines. - Same rotor and scrolll (Gerotor) design as our famous 3, 4, 4 and one- half, and 5 Stage Dry Sump Pumps
- Eliminates stock oil pump failures
- Includes pressure section specifically sized for Honda appliactions (Contact Moroso Custom Department for unique requirements)
- External pressure adjustment allows a plus or minus 30 psi range from factory setting of 60 psi
|
| | No. | Description/Application | | 25610 (NEW) | External Oil Pump, Single Stage, Reverse Rotation. Inlet and outlet holes are -10AN thread. |
| Accessories:
Nos 23750 pr 23766 - Oil Filter Mount
No 23815 - Filter Block-Off
No 25710 - Drive Kit
No 23498 - Pump Mount Bracket
No 22459 or 22466 - Oil Filter
Drag Race Oil Pump Drive Kit, Honda 
| Fits: Honda 1.6L, 1.8L & 2.0L engines. - Drives Oil Pump at 53% of crankshaft speed
- Kit includes all necessary hardware: Stepped steel washer, drive pulley, drive mandrel, radiused tooth gears and correct length drive belt, crank bolt and alternator dirve
- Use with Moroso External Oil Pump Nos. 25610 and 25630
|
| | No. | Description/Application | | 25710 (NEW) | Drag Race Oil Pump Drive Kit. |
|
External Oil Pump Mounting Brackets, Honda
Honda 1.6L, 1.8L and 2.0L Engines 
- Brackets are specially designed to secure Moroso Oil Pump Nos. 25630 and 25610
- Anodized billet aluminum brackets mount directly to existing A-C compressor bosses on the block
- Includes all mounting hardware
|
| | No. | Description/Application | | 23497 (NEW) | Dry Sump Pump Mounting Bracket for Moroso Oil Pump No. 25630. | | 23498 (NEW) | External Wet Sump Pump Mounting Bracket for Moroso Oil Pump No. 25610 |
|
Oil Filter Block-Off Plate/Honda 
- Allows customer to feed oil to engine from external source
- Has integral male -10AN fitting for oil feed
- Includes O-ring for leak free installation
- Anodized finish to protect from corrosion
- Racing applications only
|
| | No. | Description/Application | | 23815 (NEW) | Oil Filter Block-Off Plate, Honda 1.6L, 1.8L, 2.0L & 2.2L Engines |
|
|
