Use as a remote Air/Oil Separator and Filter on Vacuum Pump Systems. Designed to be plumbed between the valve cover (usually) and the "IN" side of the Vacuum Pump Features -12AN Inlets and Outlets and a -6AN Drain Dimensions: 3-1/8" dia., 6" tank height.

Remote breather and oil separator tank is a perfect companion for Moroso's Racing Vacuum Pumps Features -12 AN fittings All-aluminum, lightweight tank features mounting straps to simplify installation Includes non-hooded, clamp-on-style Filtered Breather that traps oil while allowing air to escape freely Hand-operated drain cock facilitates tank cleaning Dimensions: 3-1/8" dia., 6-1/2" tank height (without filter), 11-1/2" overall height

*Not legal for sale or use on pollution-controlled vehicles.

3/8" NPT inlet Use as a remote breather/oil separator on dry sump tanks, rear axle housings, etc. Designed to be panel-mounted and comes complete with Filtered Breather No. 68815, and drain cock Dimensions: 3-1/8" dia., 6-1/2" tank height without filter Use with Dry Sump Tank No. 22660, 22663, 22665 or 22670

*Not legal for sale or use on pollution-controlled vehicles.

Provides remote filling capabilities and breathing capacity Mounted so that its bottom outlet, with 3/4" NPT female fitting, is higher than the inlet to the power steering pump, rear axle housing, etc. The 3/8" NPT fitting located at the top of the tank can be used to connect a vent line to the rear axle housing for quicker filling or as a return line when the tank is used as a radiator catch can

Eliminates the need for two tanks with a larger capacity 2.5 Quart tank complete with dual –12AN fittings allowing hookup from Vacuum Pump and Dry Sump Pump All-aluminum, lightweight 3" x 17-1/2" (installed) tank includes mounting clamp to simplify installation Includes non-hooded, clamp-on-style Filtered Breather that traps oil while allowing air to escape freely Hand-operated drain cock facilitates tank cleaning

*Not legal for sale or use on pollution-controlled vehicles.

Remote breather and oil separator tank is a perfect companion for Moroso’s Racing Vacuum Pumps Features -12 AN fittings All aluminum, lightweight tank features mounting straps to simplify installation Includes non-hooded, clamp-on-style Filtered Breather that traps oil while allowing air to escape freely Hand-operated drain cock facilitates tank draining Dimensions: 3-1/8" dia., 6-1/2" tank height (without filter), 11-1/2" overall height Separates for easy cleaning

Features two 3/8" NPT female bungs. 180 degrees apart Internally Baffled Can be use as a remote crankcase breather tank with the installation of Moroso P/N 22635 Positive Seal Fittings Designed to be panel-mounted and comes with T-bolt mounting Clamp Comes with Breather No. 68815 Dimensions: 3-1/8" dia., 6-1/2" tank height without filter Drain valve

*Not legal for sale or use on pollution-controlled vehicles

From the factory excess crankcase vapors and residual oil are vented back Into the intake manifold The Moroso Air-Oil Separator is plumbed Into the PCV system and captures this oil mist to reduce detonation and deposits on the intake track including the valves themselves Billet Aluminum body compliments any engine compartment and can be polished, chromed or powder coated for a custom look Has a bottom drain with an elbow that makes draining the collected oil a mess-free proposition Includes brackets for both 5.7 and 6.1 engines and includes PCV hose for plumbing into the PCV system

Black polyethylene for light weight 2" Breather filter mounted on top Four sizes of inlet fittings available Can be modified for additional fitting for dual vent hoses Aluminum bottom drain fitting 3/8" NPT Petcock Works with Mounting Bracket Part No. 63401 Dimensions: 3-1/8" Dia. 7.50" tank height without Breather, 10.50" with Breather

Fits: All 3-1/8" diameter tanks such as Moroso No. 63660, 85400, 85402, 85404, 85406, 85450, 85465, 85466, 85467, 85470, 85471, 85473 Manufactured from Billet Aluminum Set screw prevents loosening of tank